Garlock ST706 / Garlock Style 706 / Garlock st-706 (DISCONTINUED)

Cut Gaskets » Garlock ST706 / Garlock Style 706 / Garlock st-706 (DISCONTINUED)

Garlock has discontinued the ST 706 or (Garlock Style 706) and is no longer available. Limited quantities may still be available; you may contact Munaco Sealing Solutions for availability 864-676-2055 to check our current stock levels. To aid you in finding a suitable replacement gasket material for your applications, Munaco has provided you with the sheet gasketing materials below. This is especially important because there is not direct replacement for Garlock 706 gasket material. You will find the appropriate features, benefits, capabilities, attached data sheets to help select the replacement gasket material for Garlock st-706. Garlock 706 was made from Inorganic fibers with a nitrile (NBR) rubber binder, primarily intended for use in saturated steam and superheated steam. Garlock 706 maximum continuous operating temperature was 750F; and maximum pressure was 1500 psig. For all of the below sheet gasket materials, and sheet gaskets in general, it is important to remember that 1/16" thick gaskets perform better than 1/8" thick gaskets in handling higher pressures. Thinner gasket materials (1/16") below have better blow-out resistance than thicker gasket materials. It is important that you contact Munaco engineering (864-676-2055) and Garlock engineering (800-448-6688) when selecting a replacement material for Garlock 706. (Click HERE! for Garlock Style 706 data sheet)

Garlock 9900 / Garlock Style 9900
  • Click HERE! for Garlock Style 9900 data sheet
  • Graphite fiber gasket material with nitrile (NBR) rubber binder
  • For saturated steam, water, oil, inert gases, aliphatic hydrocarbons and gasoline
  • 650°F Continuous maximum operating temperatures (750°F for st-706)
  • Same compressibility as Garlock Style 706 (Click HERE! for Garlock Style 706 data sheet)
  • Better recovery than Garlock Style 706
  • Less creep than Garlock Style 706
  • For saturated steam above 150 psig or superheated steam, consult engineering
 
Garlock IFG 5500 / Garlock Style 5500
  • Click HERE! for Garlock Style 5500 data sheet
  • Inorganic fiber gasket material with nitrile (NBR) rubber binder
  • For saturated steam, water, oil, inert gases, aliphatic hydrocarbons, gasoline, refrigerants
  • 550°F Continuous maximum operating temperatures (750°F for st-706)
  • Same compressibility as Garlock Style 706 (Click HERE! for Garlock Style 706 data sheet)
  • Same recovery as Garlock Style 706
  • Less creep than Garlock Style 706
  • For saturated steam above 150 psig or superheated steam, consult engineering
 
Garlock THERMa-PUR / Garlock Style 4122 / Garlock 4122-FC
  • Click HERE! for Garlock Style 4122 data sheet THERMa-PUR™
  • Proprietary gasket material for use in high temperature applications
  • For use in exhaust, gasification, and other oxidizing environments
  • 1832°F Continuous maximum operating temperatures (750°F for st-706)
  • THERMa-PUR™ 4122 can be provided in kammprofile and corrugated metal gasket forms
  • THERMa-PUR™ 4122 can be provided in high pressure sealing spiral-wound gaskets
  • Different capabilities than Garlock Style 706 (Click HERE! for Garlock Style 706 data sheet)
 
Garlock GRAPH-LOCK 3128 HOCHDRUCK
  • Click HERE! for Graph-Lock® Style 3128 HOCHDRUCK® data sheet
  • Graphite gasket of >99.85% carbon on a 0.002" 316SS foil insert layered construction
  • For up to 850°F in oxidizing environments and up to 1200°F in steam (750°F for st-706)
  • Better handling and greater safety, when compared to other metal inserted graphite
  • Scratch resistant surfaces, cuts with a utility knife, Meets TA-LUFT requirements at 50MPa stress
  • Different capabilities than Garlock Style 706 (Click HERE! for Garlock Style 706 data sheet)
  • For saturated steam above 150 psig or superheated steam, consult engineering
 

Contact us today:

Contact us by Phone800-986-2055